Setup tp link router11/4/2023 ![]() 3Power on your router and computer first and then modem. 2Connect your modem to the WAN port of the TP-Link router via an Ethernet cable connect a computer to TP-Link router’s LAN port via an Ethernet cable. To get know more details about each function and configuration please go to Download Center to download the manual of your product. 1Turn off your modem, router and computer. Connect your TP-Link modem router to the root router with an Ethernet cable (LAN to LAN) and test your wireless connection through your computer.Ĭongratulations! All your Wi-Fi-enabled devices can connect to the customized wireless network. ![]() Note: After changing the IP address settings, you’ll need to reboot your modem router, then log back into the modem router with the new IP address. With the default setting (Port 80 and IP address 0.0.0. Click Security->Remote Management on the left side. Change the LAN address to one on the main router’s subnet. Type the username and password in the login page. Click Advanced > Network > LAN > DHCP Server. Input your Wireless Network Name (SSID) and Password, then click Save (bottom left of the screen) to save your changes. Click Advanced on the top navigation bar, then select Wireles s on the left panel. If needed, you may refer to How to log into the web-based interface of the AC VDSL/ADSL Modem Router for more detailed information. The default login username and password are both admin (all lower case). Step 5: Check the Enable VPN Server box, then fill in the following information as prompted. Note: This step must be completed before enabling OpenVPN. Step 4: Click Certificate to generate a certificate. ![]() Step 2: Click Advanced on the top navigation bar. Log into the router using or the default IP address 192.168.1.1. The default username and password are admin. Connect your computer to the LAN port of the TP-Link DSL modem router via a cable. According to Model Number to find setup and configuration videos for your TP-Link product (s). You will need this information for the setup on the router later. You will find long-ranged, medium-ranged, and close-. After pushing the WPS button of your Router/AP, your Router/AP’s WPS LED should blink. Before Step 6, keep the AP disconnected from the Root Router. The vast collection of TP-Link routers allows the buyer to fulfill any kind of requirement of the buyer. To avoid connection issues during setup, complete the following steps through a computer wired directly to the router.Ģ.
0 Comments
Leave a Reply.AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |